CANape

[can we generate frequency using counters . if so then what is the range and resolution.]

Hi All
 
In one of the project i an using LabVIEW 7.1, CANape & Vector CAN card. In this project, i have to develop a LV program to read the particular memory address from the UUT (unit under test) via CANape. The CANape is communiating with the UUT using CCP (CAN calibration protocol).
 
In this, both Labview & CANape shall be running parallely on the system. Labview shall send the memory address which we wants to read, to the CANape & CANape shall send it to the UUT using CCP protocol. Then UUT shall send the value of that particular address to the CANape & CANape shall send it to LabVIEW.
Now , Problam is that i do not know how to send the command & then read the value using LabVIEW , CANape & Vector CAN card. I do not have any knowledge about CANape & Vector.
 
If anybody has any knowledge about this then please share it. If any document & example then please share them also.
Please reply as soon as possible.
 
Thanxs & Regards
R

[Roland A.]

Hello can we gen.. Unfortunately, since we
do not support CANape, we have no example programs to share. The
LabVIEW Example Finder has some good examples on controlling other
programs through LabVIEW. It would
probably be best to speak with Vector about how their CANape software
operates.