CANTalk

[can can canopen]

Hi
 
Does anyone have the idea about CANTalk application, If yes, please share the documents.
 
I have to read Node Id of my hardware using CANTalk application using labview, does anyone have idea regarding this.
Please help me out.
 
Thanks in advance.
 
Rohith M P

[Andy L]

Hi Rohith,
 
Is the CANTalk application using LabVIEW CAN vis to communicate with the different controllers on the network?  Could you please provide more information on how you have the system configured?  What version of LabVIEW are you using? 
 
I would also recommend looking at the CAN read and write examples in LabVIEW. 
Click <a href="http://zone.ni.com/devzone/cda/tut/p/id/2732" target="_blank">here</a>&nbsp;for a detailed overview of&nbsp;Controller Area Network.&nbsp;
&nbsp;
Regards,&nbsp;

[can can canopen]

Hi Andy
The device I am testing is the Motor controller drive, CANOpen has been implemented in that, currently I am doing labview automation of the test cases provided my client.In one of my application&nbsp;I have to change the Node id, and have to check the communication by providing the new node id.This I implemented, but my client is saying that you need to show the new node id as output using CANtalk protocol.This CANtalk Protocol has to be implemented using CAN.
I dont think so I can do that using CANOpen.
&nbsp;

[can can canopen]

NO Andy I Client the word referred to the person who gave me the project.
They had given a executable which is almost similar o Ni's Code Loader, I thnik it works on CANTalk protocol.
The device should be on for that,this scans the node id of the device ,with specific baud selected.
Once the device gets detected,it allows us to download firmware to the device.